How to Fix No Internet, Secured on Windows

What Causes This?

The “No Internet, Secured” message usually means your PC is connected to the Wi-Fi router, but Windows cannot reach the internet through that connection. This often happens because of a bad IP configuration, corrupted DNS or network cache, a stuck network adapter, outdated drivers, or a problem with the router itself. VPN apps, firewall software, and recent Windows updates can also interfere with normal network communication.

Common Symptoms

• Wi-Fi shows as connected, but websites and apps will not load
• The network icon says “No Internet, secured”
• Other devices on the same Wi-Fi may still work normally
• Running the Windows troubleshooter reports DNS or adapter issues
• The connection works briefly, then drops again

How to Fix It Manually

1. Restart your PC and router

   1. Save your work and restart your computer.
   2. Unplug your router and modem from power for 30 seconds.
   3. Plug them back in, wait 2-3 minutes, then reconnect to Wi-Fi.
   4. Check if the error is gone.

2. Forget and reconnect to the Wi-Fi network

   1. Press Windows + I to open Settings.
   2. Go to Network & internet > Wi-Fi.
   3. Select Manage known networks.
   4. Click your Wi-Fi network, then choose Forget.
   5. Reconnect by selecting the network again and entering the password.

3. Run Windows network reset commands

   1. Press Windows, type cmd.
   2. Right-click Command Prompt and choose Run as administrator.
   3. Run these commands one at a time, pressing Enter after each:

      netsh winsock reset
      netsh int ip reset
      ipconfig /release
      ipconfig /renew
      ipconfig /flushdns

   4. Restart your PC after the commands finish.

4. Disable and re-enable the network adapter

   1. Press Windows + X and click Device Manager.
   2. Expand Network adapters.
   3. Right-click your Wi-Fi adapter and choose Disable device.
   4. Wait 10 seconds, then right-click it again and choose Enable device.
   5. Test your connection.

5. Update or reinstall the Wi-Fi driver

   1. In Device Manager, expand Network adapters.
   2. Right-click your wireless adapter and select Update driver > Search automatically for drivers.
   3. If that does not help, right-click the adapter again and choose Uninstall device.
   4. Restart your PC so Windows can reinstall the driver automatically.

6. Turn off VPN, proxy, or third-party security tools temporarily

   1. Disconnect any VPN app you are using.
   2. Go to Settings > Network & internet > Proxy and make sure a proxy is not enabled unless you use one intentionally.
   3. Temporarily disable third-party antivirus or firewall software and test the connection.
   4. If the internet works after this, one of those tools is blocking access.

7. Use Windows Network Reset

   1. Open Settings with Windows + I.
   2. Go to Network & internet > Advanced network settings.
   3. Select Network reset.
   4. Click Reset now.
   5. Your PC will restart and reinstall network adapters, so you will need to reconnect to Wi-Fi afterward.

Fix It Automatically with Kudu

If you do not want to work through network commands and adapter settings manually, Kudu can check for common causes of the “No Internet, Secured” error and repair them for you. It can clear broken network cache, reset key networking components, and fix misconfigured Windows settings that often cause this problem.

Download Kudu Free →